Audio Settings/Channel Mapping - Doremi IMS1000 Installation And User Manual

o Audio Settings: Allows the user to map/route all audio tracks to operator-
o Cinelister Configuration: Allows the user to configure certain values for the
o Live Manager: Allows the user to add a live event CPL.
o Backup Manager: Allows the user to back up and restore certain files on a
o License Agreement: Allows the user to agree to the software license terms and
o Automatic Log Upload Manager: Allows user to automate log generation and
o Log Operator Maintenance: Allows the user to log important information (e.g.,
o Threshold Manager: Allows the user to view and adjust threshold levels for the

12.1 Audio Settings/Channel Mapping

The Audio Settings application allows the user to route all audio tracks in an SMPTE/Interop
package to operator-designated outputs. The main purpose of the mapping is to allow users to
move the HI or VI channels to a specific output. The Audio Settings application is available in
the Administration tab.
● To open the Audio Settings application, go to Administration → Control Panel → Audio
Settings (Figure 109).
Template
Mapping
IMS.OM.002949.DRM
designated outputs (only SMPTE content). This where you can configure the
audio delay.
Cinelister application.
server.
conditions.
specify the frequency and location the logs will be sent to.
hard disk replacement, projector lamp replacement, etc.). This application helps
the system administrator keep track of any change operated in a theater booth.
server.
Figure 109: Audio Mapping Window (Disabled) - Default Setting
Page 101 of 310
Doremi Labs
Channel
Mapping
Tab
Version 1.4