Audio Delay Configuration - Doremi IMS1000 Installation And User Manual

12.2.4 Audio Delay Configuration

From the Administration → Control Panel → Audio Settings → Audio Delay button, the user can
modify the delay between the audio and video by dragging the cursor to the desired delay on
the graphical cursor that allows values between -500 milliseconds and +500 milliseconds
(Figure 121). To access the Audio Delay tab, click on the green arrow button the right side of
the Channel Mapping tab (Figure 120). All audio tracks will be modified for the same delay
selected. After the delay has been configured, click on the green Save button to save your audio
delay settings (Figure 121). The selected audio delay will be displayed as numeric MS
(milliseconds) value.
Note: The user cannot add separate delays for each track.
Save
Button
● Positive Value: The audio will be heard behind the video action.
● Negative Value: Indicates that the audio is ahead of the video action.
The recommended value that matches almost all setups is 80 milliseconds.
IMS.OM.002949.DRM
Figure 121: Audio Delay Tab
Page 112 of 310
Doremi Labs
Version 1.4