Power On Projector - Doremi IMS1000 Installation And User Manual


Note: Ethernet port (Eth0) is set to DHCP by default. All IMS1000 boards are shipped
from the factory with the following default IP address for Eth1:
o IP: 192.168.100.50
o SM: 255.255.255.0
o GW: 192.168.100.1

For more information, refer to Section 23.
6.6

Power on Projector

● Connect AC power to the projector (Figure 74).

After about 1:45 minutes, the main screen will appear on the touch panel controller. Go
to Menu → Login and login as Marriage. Contact your administrator for the correct
password (Figure 75).
Login
IMS.OM.002949.DRM
Figure 74: AC Power
Figure 75: Login
Page 71 of 310
Doremi Labs
Version 1.4