Installation And Marriage With A Nec Series-2 Projector; Preparation - Doremi IMS1000 Installation And User Manual

4 Installation and Marriage with a NEC Series-2
Projector

Before you begin to install the IMS1000 into your projector, be sure that:
o The projector is powered down and in the off position.
o Disconnect the AC power cord from the wall.
o Remember to always follow ESD procedures.
4.1

Preparation


Gently pull on the filter cover to remove it (Figure 7).
IMS.OM.002949.DRM
Figure 6: NEC Projector
Figure 7: Remove Filter Cover
Page 34 of 310
Doremi Labs
Filter
Cover
Version 1.4