Shut Down - Doremi IMS1000 Installation And User Manual

7

Shut Down

In order to properly shutdown the IMS1000 board and the projector, the user must follow the
steps below.

To shut down the board, go to Administration → System (Figure 91).
Shutdown
Button

Click on the Shutdown button and wait two minutes. The LED lights on the IMS1000 will
stop flashing and the HDD lights will have a steady light once it has finished shutting
down.

After two minutes, refer to the projector manufacturer manual for proper power down
sequence to shut down the projector.

The IMS1000 board and the projector have now been properly shut down.
Warning: The IMS1000 must be shut down according to the designated method. Failure to
follow the above method may result in file corruption.
IMS.OM.002949.DRM
Figure 91: Shut Down
Page 81 of 310
Doremi Labs
Version 1.4