Connection To A Signal Event - Doremi IMS1000 Installation And User Manual

12.6.4 Connection to a Signal Event

● Click on the Trigger Cue that you want to assign the Signal event to.
● Click the Connect to an Event button from Macro Editor's Trigger Cue tab. The Connect
to an Event drop-down window will appear (Figure 147).
● Click the Signal button and Click Add. The Signal Setup window will appear (Figure
150).
● Choose the device from the drop-down menu.
IMS.OM.002949.DRM
Figure 149: GPI Event Added
Figure 150: Signal Event Setup Window
Page 134 of 310
Doremi Labs
Event
Added
Version 1.4