Colors Tab - Doremi IMS1000 Installation And User Manual

Save as
Default
Button
Restore
Button

The following networking configuration information is displayed:
o
o
o

The user can modify the network configuration by inputting the desired configuration in
the designated fields.

Root privileges are required to change the networking parameters.

Click Save to confirm the changes. These changes take immediate effect and they
expire when you reboot the unit, being replaced by the default networking configuration
(Figure 308).

You can save these settings as default by pressing the Save as Default button. These
configurations will be effective even after a reboot (Figure 308).

To restore the networking configuration to factory default, click on the Restore button
(Figure 308). The factory default settings are:
o
o
o

Make sure to click the Save button when finished setting the network configuration.
13.11.2.3

The third tab, called Colors, allows the user to modify the color space for HDMI and
HDSDI inputs (Figure 309).
IMS.OM.002949.DRM
Figure 308: System Tab
IP
Mask (sub-network mask)
Gateway
IP: 192.168.254.246
Mask: 255.255.255.0
Gateway: 192.168.254.1

Colors Tab

Page 246 of 310
Doremi Labs
Save
Button
Version 1.4