Audio Cables Installation - Doremi IMS1000 Installation And User Manual

5.3

Audio Cables Installation

● Plug one shielded CAT5 or CAT6 cable end into the connector labeled AES-OUT 1-8 on
the IMS1000 board (Figure 49).
● Plug the other end of the shielded CAT5 or CAT6 cable into the audio processor.
● Take another shielded CAT5 or CAT6 cable and plug the end into the connector labeled
AES-OUT 9-16 (Figure 49).
● Plug the other end of the shielded CAT5 or CAT6 cable into the audio processor.
Note: If the audio processor does not have RJ-45 connectors but has a single DB25 connector,
then you will need to use the RJ-45 to DB25 converter that is provided with the IMS1000 (Figure
50).
IMS.OM.002949.DRM
Figure 49: Audio Connectors
Figure 50: RJ-45 to DB25 Converter
Page 57 of 310
Doremi Labs
AES-OUT
1-8
AES-OUT
9-16
Version 1.4