Doremi IMS1000 Installation And User Manual page 54

Blank
Cover

The media block slot should now be empty (Figure 44).
Guiderails

Carefully remove the IMS1000 from its carton and antistatic bag.

Gently place the IMS1000 board into the projectors media block slot guiderails on the
inside of the slot (Figure 44).

Tighten the two screws in place (Figure 45).
IMS.OM.002949.DRM
Figure 43: Unscrewing the Blank Cover
Figure 44: Empty Media Block Slot
Page 54 of 310
Doremi Labs
Two
Screws
Version 1.4