Projector Channel Switch Insertion - Doremi IMS1000 Installation And User Manual

12.5.8 Projector Channel Switch Insertion

● To add a Projector Channel Switch Action, highlight the desired Macro Cue.
● Select the Projector Channel Switch Action option which is located in the Projector
section in the Select an Action to Insert drop-down menu (Figure 136).
● Click the Insert button.
● The following window will appear (Figure 141):
Figure 141: Add a New Action Window - Channel Switch
● Choose the name of the projector from the drop-down menu window that appears
(Figure 141).
● Use the plus/minus buttons to select the channel to send the command to.
● Click the Ok button.
12.5.9 Automation Library Usage
12.5.9.1 Using Automation Library
Support for theater automation control is provided. The list of currently supported devices is:

eCNA

JNior Expansion Module

JNior
When one of the supported devices (e.g., eCNA and JNior) is added, the Macro Editor will allow
the user to use the corresponding commands for each device.

To use a library command, click on Library in the Add an Action window and click Insert.

The following pop-up window will appear (Figure 142):
IMS.OM.002949.DRM Page 128 of 310
Doremi Labs
Version 1.4