Click the Save button to save the configuration. The server is now added to the Content
Feed Manager network (Figure 157).
12.8.2 Adding a Server Manually
12.8.2.1
Networking the Server(s)
● The Content Feed Manager GUI can be manually set up by clicking the New button. This
will allow the user to add a new server for which the fields will have to be manually
entered.
● Click the New button to add a new server. The following fields will appear (Figure 157):
New
Button
Delete
Button
Revert
Button
Save
Button
● Enter the Identifier name in the Identifier field. It is recommended that a unique identifier
be used (e.g., screen 1, screen 2, etc).
● The Ingest Protocol is set at FTP.
● Enter the IP address for the server.
● Optional: Click the Test button to test the IP connection (Figure 157). A pop-up window
will appear that will test the connection. Click the Close button to exit this window.
● Enter the Remote Path for the destination of the server. The user will have to manually
enter the Remote Path.
● Click the Save button to save your changes. Clicking the Revert button before saving will
cause the user to lose all of the changes (Figure 157).
IMS.OM.002949.DRM
Figure 157: Add New Server
Page 142 of 310
Doremi Labs
Test
Button
Advanced
Options
Version 1.4