Installation And Marriage With A Christie Series-2 Projector - Doremi IMS1000 Installation And User Manual

6 Installation and Marriage with a Christie Series-2
Projector

Before you begin to install the IMS1000 into your projector, be sure that:
o The projector is powered down and in the off position.
o Disconnect the AC power cord from the wall.
o Remember to always follow ESD procedures.
6.1 Preparation

Remove the blank cover of the media block slot, if it is present, by unlatching the two
latches on the sides (Figure 62).

The media block slot should now be empty (Figure 63).
IMS.OM.002949.DRM
Figure 61: Christie Projector
Figure 62: Faceplate Latches
Page 64 of 310
Doremi Labs
Two
Latches
Version 1.4