Doremi IMS1000 Installation And User Manual page 30

Ethernet
● The IMS1000 has two built-in Gigabit Ethernet connectors. The left one is identified as
ETH1 and the right one is identified as ETH0.
eSATA
● Used for ingesting content at four times the maximum transfer rate of USB 2.0.
USB
● There are three USB 2.0 ports on the front panel that can accommodate an external
USB device, such as the CaptiView transmitter or USB external drive for content
ingestion.
HDMI

To be used for inputting of alternative content, i.e., Blu-ray Disc player, Gaming, Digital
Cameras or Laptop presentations.

HDCP (High-bandwidth Digital Content Protection) supported
IMS.OM.002949.DRM
Figure 3: IMS1000 with Barco Faceplate
Figure 4: IMS1000 with Christie Faceplate
Page 30 of 310
Doremi Labs
Version 1.4