Installation And Marriage With A Barco Series-2 Projector - Doremi IMS1000 Installation And User Manual

5 Installation and Marriage with a Barco Series-2
Projector

Before you begin to install the IMS1000 into your projector, be sure that:
o The projector is powered down and in the off position.
o Disconnect the AC power cord from the wall.
o Remember to always follow ESD procedures.
5.1 Preparation

Remove the blank cover of the media block slot by unscrewing the two screws on the
sides (Figure 43).
IMS.OM.002949.DRM
Figure 42: Barco Projector
Page 53 of 310
Doremi Labs
Version 1.4