Doremi IMS1000 Installation And User Manual page 72

● Go to Menu → Administrator Setup → Content Devices Configuration (Figure 76). From
the drop-down menu, make sure that Doremi is selected (Figure 77).
Administrator
Setup
● Turn the projector on by pressing the green Power button on the touch panel controller
(Figure 78). After about two minutes, the projector will be fully powered on.
IMS.OM.002949.DRM
Figure 76: Content Devices Configuration
Figure 77: Drop-Down Menu
Page 72 of 310
Doremi Labs
Content
Devices
Configuration
Doremi
Selected
Version 1.4