Troubleshooting - Doremi IMS1000 Installation And User Manual

16 Troubleshooting

16.1 RAID Not Detected
If you are installing (swapping) HDDs from another IMS1000, each HDD must be installed in the
same order as they were in the previous set up. Otherwise the RAID will not be detected.
16.2 Pre-Loaded Test Content

The user has the ability to test the playback of the IMS1000 without having the HDDs
installed. To do this, go to Control → Cinelister → Editor.

The content will already be available in Cinelister, under the section called Test (Figure
336).
Test
Content

To test playback, click on the content so that it appears in the right side of the GUI
(Figure 336).

Go to the Playback tab in Cinelister and click on the Play button.
IMS.OM.002949.DRM
Figure 336: Pre-Loaded Content
Page 270 of 310
Doremi Labs
Test
Content
Version 1.4