Removing An Ecna Device - Doremi IMS1000 Installation And User Manual

IP
Address
12.3.3.1

To remove the eCNA device, select it in the Device Manager GUI and click the Delete
Device button (Figure 126).
12.3.4 Adding a JNior Device

To add the JNior device, click the New button in the Device Manager window (Figure
123).

The New Device drop-down window will appear. Select JNior.

The Device Manager GUI will be updated to reflect the addition of the JNior device.

Input the JNior Server IP address in the appropriate field (Figure 128).

The port number field will already contain the appropriate value (factory default value).
Note: The JNior device documentation will provide the correct username and password (factory
default values).

Click the Save button to record the settings. A window will appear asking for a password.
Enter the password to proceed. Clicking the Revert button prior to saving will delete the
unsaved information (Figure 126).
IMS.OM.002949.DRM
Figure 127: eCNA Added

Removing an eCNA Device

Page 117 of 310
Doremi Labs
Enabled
Check
Box
Version 1.4