Live Event In Cinelister - Doremi IMS1000 Installation And User Manual

Note: The MPEG Streamer format is dynamically handled. This means that the 4:2:2 vs 4:2:0
parameter is automatically detected from the MPEG stream itself. There is no need to provide
this information to the playback engine.

Repeat the steps above as many times as necessary to generate another live CPL.
To view the properties of the CPL, highlight the CPL and click on the Properties button on the
right-hand side (Figure 186).
This information is the same information provided in the Content Manager Composition Playlist
tab (Figure 187). See Section 13.10.2 for more detailed information.
12.16.2

Live Event in Cinelister

To use the Live CPL, allowing a live event, open CineLister (go to Control → CineLister).

The newly created live CPL will be visible under Live in the left part of the Editor tab
allowing the user to insert it in a Show Playlist like any standard CPL (Figure 188).
For more information on Show Playlist building, see Section 13.
IMS.OM.002949.DRM
Figure 187: CPL Properties
Page 163 of 310
Doremi Labs
Version 1.4