Acceptable Original Sizes; Paper Size And Scanned Area - Ricoh SP 5200S Operating Instructions Manual

Acceptable Original Sizes

This section describes the size and thickness limitations that apply to originals placed on the exposure
glass or the ADF.
Original sizes and thickness
Where original
is set
Exposure glass Up to A4 (210 × 297 mm),
8
ADF, one-sided A5
original
(up to 1,200 mm long)
5
14
ADF, two-sided A5
original
(up to 356 mm long)
5
14
*1 Above specification depends on the paper type and condition
• You can use documents longer than 356 mm (14 inches) with the User Parameter (switch 14, bit 1)
in the Parameter Settings. For details about Parameter Setting, see "Parameter Settings".
• p.375 "Parameter Settings"

Paper Size and Scanned Area

This section explains the size of the area the machine can scan.
• There may be a difference in the size of the image when it is printed at the destination.
• Even if an original is correctly placed on the exposure glass or in the ADF, a margin of 3 mm (0.1
inches) around each edge of the original may not be sent.
Acceptable original size
1
/ × 11 (216 × 279 mm)
2
to A4
1 1 1
/ × 8 / to 8 / ×
2 2 2
to A4
1 1 1
/ × 8 / to 8 / ×
2 2 2
Maximum number of sheets
1 sheet
50 sheets: Less than 80 g/
2 *1
m (21 lb. Bond)
50 sheets: Less than 80 g/
2 *1
m (21 lb. Bond)
Placing Originals
1
Paper thickness
2
52 128 g/m
(14 34 lb.
Bond)
2
60 105 g/m
(16 28 lb.
Bond)
61