Ricoh SP 5200S Operating Instructions Manual page 115

5. Check that [Program / Change] is selected.
6. Select the name whose fax destination you want to change.
Press the name key, or enter the registration number using the number keys.
7. To change the name or key display, press [Change] under "Name" or "Key Display".
8. Enter the name or key display, and then press [OK].
9. To change the title, press the key for the classification you want to use from "Select Title".
10. Press [Fax Dest.].
11. Press [Change] under "Fax Destination".
12. Enter the new fax number using the number keys, and then press [OK].
13. Change the settings of "Adv. Features", "International TX Mode", "Fax Header", and
"Label Insertion", as necessary.
Registering Destinations in the Address Book
1
113