Ricoh SP 5200S Operating Instructions Manual page 397

4. Press [Initial Set Up].
5. Select the function you want to program.
6. To program Authorized Reception and Special Reception Function, press [Authorized
Reception] or [Special Reception Function].
7. Press [On] or [Off], and then press [OK].
The illustration shows the "Authorized Reception" display as an example.
8. To program Bypass Tray Paper Size, press [Bypass Tray Paper Size].
9. Select the size you want to program.
You can select a size from [Regular Size], or [Custom Size].
If you select [Regular Size], proceed to step 10.
If you select [Custom Size], proceed to step 11.
Special Senders to Treat Differently
7
395