Ricoh SP 5200S Operating Instructions Manual page 175

Facsimile reference

Hide thumbs Also See for SP 5200S:

Table of Contents

Select the destination of notification, and then press [OK].

If you make a mistake, before pressing [OK], press [Clear] or press the selected Destination key

again to turn the highlight off.

[E-mail TX Results] gets highlighted and the destination of notification selected appears.

The standby display appears.

To check the settings, press [TX Mode].

Specify a destination, and then press the [Start] key.

• You can program one of the Quick Operation keys with operations for this function. Using the

Quick Operation Key allows you to omit steps 3 and 6. For details about Quick Operation Key,

see "General Settings".

• p.140 "Sender Settings"

• p.335 "General Settings"

Confirming Transmission Results by E-mail

Show Quick Links

Table of Contents

Sp 5210sf Sp 5210sr