Ricoh SP 5200S Operating Instructions Manual page 183

Set this function as follows:
• Set Label Insertion to [On] when programming fax destinations.
• Set Label Insertion to on when sending fax documents.
• On the Standard Message screen, select the standard message you want to print.
1. Place the original, and then select the scan settings you require.
2. Press [TX Mode].
3. Select [Option Setting].
4. Press [Label Insertion] to highlight it.
To cancel Label Insertion, press [Label Insertion] again.
5. Press [OK] twice.
6. Specify the destination, and then press the [Start] key.
• To print a standard message that is not programmed as a default, program it in advance in
"Program / Change / Delete Standard Message" in the Facsimile Features menu. For details
about the programming method, see "Send Settings".
• You can program one of the Quick Operation keys with operations for this function. Using the
Quick Operation Key allows you to omit steps 2, 3, and 5. For details about Quick Operation Key,
see "General Settings".
Transmission Options
2
181