CR 125 2011 - WR 125 2011
27
25
29
28
3
1
2
3
ENGINE DISASSEMBLY
Disengage return spring (27) on starter shaft (28) from its retainer on right
crankcase half.
H06539
Working on the inner side, slide out starter shaft assembly (28) complete with
control gear, and collect washer (29).
H06540
Sprocket-side component and cover disassembly
4
Loosen the three retaining screws (1), and remove cover (2). Collect gasket.
Loosen the two retaining screws (3) on sprocket cover (4), and remove it to-
gether with the protective plate and spacers.
H06541
F.9
Workshop Manual Ed. 06-2011