Husqvarna CR 125 2011 Workshop Manual page 159

FRONT SUSPENSION
CR 125 2011 - WR 125 2011
Fit the dust seal to the outer tube.
Make sure that there is not play between dust seal and outer tube.
H06839
Refit the cartridge.
Tighten the nut all the way onto the rebound adjuster rod.
Make sure rebound adjuster rod thread length is at least 15 mm (0.6 in.).
H06840
Fill the cartridge with the specified oil.
H06841
Pump the piston rod up and down repeatedly to remove any air from the cyl-
inder.
H06842
I.11
Workshop Manual Ed. 06-2011