Husqvarna CR 125 2011 Workshop Manual page 172

Workshop Manual Ed. 06-2011
FRONT SUSPENSION
CR 125 2011 - WR 125 2011
Fit collar bushing, O-ring, spring guide and nut onto piston rod.
Insert the rebound adjuster rod into the piston rod.
Make sure that at least an 18 mm (0.71 in.) portion of the rebound adjuster rod
protrudes from the piston rod.
H06886
Oil filling.
Fill with the specified quantity of oil.
Fill the damper unit with the specified quantity of oil (643 cm
Slowly pump the piston rod up and down to help oil reach all points of the
cartridge.
If you haven't drained all oil from the damper unit on disassembly,
follow the procedure outlined below (Filling oil to specified level).
H06887
I.24
).
3