Clutch Reassembly - Husqvarna CR 125 2011 Workshop Manual

CR 125 2011 - WR 125 2011
1
2
ENGINE ASSEMBLY

Clutch reassembly

Fit bushing, spring and clutch control lever shaft inside L.H. crankcase half
seat. Fit the washer (1) and the disengagement group into the primary shaft in
the following order: the fist rod and the ball. All these parts must be greased
before reassembly.
H06970
Insert the clutch hub (2) in the primary shaft.
H06971
H.13
Workshop Manual Ed. 06-2011