Shock Absorber Spring Preload Adjustment - Husqvarna CR 125 2011 Workshop Manual

CR 125 2011 - WR 125 2011
1
2
SETTINGS AND ADJUSTMENTS

Shock absorber spring preload adjustment

Proceed as follows:
1. Place yourself on the right-hand side of the motorcycle.
2. Clean lock ring nut (1) and adjuster ring nut (2) of the spring (3).
3. Either with a hook wrench or an aluminium punch, loosen the lock ring nut.
4. Turn the adjuster ring nut as required.
5. Adjust preload to suit your weight or riding style and tighten the lock ring nut
firmly (tightening torque 40 Nm - 4 Kgm - 29.50 ft/lb).
Be careful not to touch hot exhaust pipe while adjusting the shock
absorber.
3
3
H06989
D.23
1
2
H06710
Workshop Manual Ed. 06-2011