Husqvarna CR 125 2011 Workshop Manual page 224

Table of Contents

Advertisement

Workshop Manual Ed. 06-2011
ELECTRICAL SYSTEM
CR 125 2011 - WR 125 2011
2- SPEED / CLOCK (figure 2)
- SPEED: motorcycle speedmaximum value: 299 Km/h o 299 mph;
- CLOCK: clock- Reading from 0:00 to 23:59:59;
A
To reset the clock, push the knob SCROLL (A) for more than 3 seconds in
order to increase the hours; release the knob and then, after 3 seconds, it is
possible to increase the minutes;
H06980
3- SPEED / TRIP 1 (figure 3)
- SPEED: motorcycle speedmaximum value: 299 Km/h o 299 mph
A
- TRIP 1: distance- maximum value: 999.9 km (the data will be lost with voltage
lower than 6V).
To setup the TRIP, push the SCROLL (A) button holding down more than 3
seconds.
H06981
4- SPEED / CHRONO (STP) (figure 4)
- SPEED: motorcycle speedmaximum value: 299 Km/h o 299 mph;
A
- STP 1: miles/kilometers covered time;
- Reading from 0:00 to 99:59:59 (the data will be lost with voltage lower than
6V).
To activate the function STP 1, push the knob SCROLL (A) for more than 3
seconds.
- 1st step: function ON;
- 2nd step: stop to the counters;
- 3rd step: STP 1 zero-setting; TRIP 1 and AVS 1 data zero-setting;
- 4th step: function ON;
H06982
- 5th step: stop to the counters;
.............................
and so following.
M.28

Advertisement

Table of Contents
loading

Table of Contents