Shifter Forks; Fork Slider Thickness; Fork Guide Pin Diameter; Gear Groove Length - Husqvarna CR 125 2011 Workshop Manual

Workshop Manual Ed. 06-2011
ENGINE OVERHAUL
CR 125 2011 - WR 125 2011

Shifter forks

Visually inspect the shifter forks and replace any bent fork. A bent fork will
make gears hard to engage and let the transmission jump out of gear unex-
pectedly under loading.

Fork slider thickness

Standard
3.35÷3.43 mm
3
(0.132÷0.135 in.)
H06589

Fork guide pin diameter

Standard
5.8÷5.9 mm
(0.228÷0.232 in.)
3
H06590

Gear groove length

Standard
3,75÷3,82 mm
(0.148÷0.150 in.)
3
H06591
G.18
Max. size limit
3.31 mm
(0.130 in.)
Max. size limit
5.75 mm
(0.226 in.)
Max. size limit
3,9 mm
(0.153 in.)