Husqvarna CR 125 2011 Workshop Manual page 144

6 5
3
H06634
Workshop Manual Ed. 06-2011
ENGINE ASSEMBLY
CR 125 2011 - WR 125 2011
Install the lock washer and hub locking nut.
While locking the hub with tool part no. 8000 79015, lock the nut with a 22 mm
socket wrench to the specified tightening torque. Rivet washer onto nut.
1
H06617
Fit the friction plates starting by one of the seven line steel plates (3) and
alternate it with one of the six friction plates (4); the last friction plate (3) will
4
complete the pack.
Insert the spring retainer (5) and the axial needle roller bearing (6) on primary
shaft end.
H.14