Husqvarna CR 125 2011 Workshop Manual page 94

Workshop Manual Ed. 06-2011
ENGINE DISASSEMBLY
CR 125 2011 - WR 125 2011
Carry out this operation using special tool part no. 8000 79015 with the ends
inserted inside the two opposite grooves on clutch hub.
Lock clutch hub in place with tool, and loosen locking nut (13) with a 22 mm
socket wrench.
13
H06531
Slide nut (13), lock washer (12) and clutch hub (14) out of primary shaft end.
14
H06796
Slide washer (15) out of primary shaft.
15
H06797
F.6