Gear Change - Husqvarna CR 125 2011 Workshop Manual

Gear change

Check that the gear front coupling teeth are in perfect conditions, make sure that the idle gears rotate freely on their shafts and that
their clearance is not higher than 0.10 mm (0.004 in.). The shaft threading and grooves must be in perfect conditions.
Moreover, make sure that the gear selector components are in good conditions.
Check that the selector groove width complies with the specified tolerance.
1
ENGINE OVERHAUL
CR 125 2011 - WR 125 2011
st
(Z=33)
th
5 (Z=26)
th
4 (Z=27)
st
1 (Z=14)
th
5 (Z=22)
th
4
rd
3 (Z=19)
rd
3 (Z=30)
th
6 (Z=21)
nd
2 (Z=25)
(Z=20)
th
6 (Z=21)
nd
2 (Z=13)
G.17
Z=13
H06866
Workshop Manual Ed. 06-2011