CHASSIS AND WHEELS
CR 125 2011 - WR 125 2011
Rear chain sprocket, secondary drive sprocket and chain
The figure at the side shows the profiles of a normally worn and an exceedingly
worn sprocket.
1 Normal wear
2 Exceeding wear
If the sprocket is exceedingly worn, replace it after loosening the six screws
that retain it to the hub.
Chain and sprockets must always be replaced as a set.
Tightening torque figures
3: 34.3 Nm, 3.5 Kgm, 25.3 ft/lb + LOCTITE 243
Workshop Manual Ed. 06-2011
Y.13