Dx4 Coin Control; Dx4 Opl Control - ALLIANCE CA050L Installation Operation & Maintenance

Operating Instructions

DX4 Coin Control

3B, 3V, 3W and 3X Control Suffixes
1. Open door and fill drum with clothes.
2. Close door.
3. Insert the coin(s) in the coin slot.
4. Press and release one of the cycle buttons to
select a cycle and start the tumble dryer. Refer to
Table 13.
To use a custom cycle, refer to the Programming
Manual.
Figure 49
Temperature
Left 104°F (40°C)
Button
Middle 140°F (60°C)
Button
Right 176°F (80°C)
Button
Table 13
NOTE: Drying times will be dependent on the
number of coins that are inserted in the coin slot.
IMPORTANT: To stop the tumble dryer at any
time during the cycle, OPEN DOOR. To restart the
tumble dryer, CLOSE door and press START
button.
5. When the cycle is complete, open door and
remove the laundry.
WARNING
To prevent the risk of fire, remove laundry
immediately in case of power failure.
70
TMB2266N
Drying Cool Down
Time Time
Varies 2 min.
Varies 2 min.
Varies 2 min.
W779
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

DX4 OPL Control

3O and R3 Control Suffixes
1. Open door and fill drum with clothes.
2. Press and release one of the cycle buttons to
select a cycle and start the tumble dryer. Refer to
Table 14.
To use a custom cycle, refer to the Programming
Manual.
Figure 50
Temperature
Left 104°F (40°C)
Button
Middle 140°F (60°C)
Button
Right 176°F (80°C)
Button
Table 14
IMPORTANT: To stop the tumble dryer at any
time during the cycle, OPEN DOOR. To restart the
tumble dryer, CLOSE door and press START
button.
3. When the cycle is complete, open door and
remove the laundry.
WARNING
To prevent the risk of fire, remove laundry
immediately in case of power failure.
TMB2266N
Drying Cool Down
Time Time
30 min. 2 min.
30 min. 2 min.
35 min. 2 min.
W779
70457901ENR7