Table of Contents
Advertisement
Serial Verification
Serial Command Echo Status (Serial Verification)
Serial Cmd:
<K701,serial command echo
control/hex output>
Default:
0 = Disabled
Options:
0 = Disabled
Serial Command Beep Status (Serial Verification)
Serial Cmd:
<K701,serial command echo
control/hex output>
Default:
0 = Disabled
Options:
0 = Disabled
Control/Hex Output (Serial Verification)
Serial Cmd:
<K701,serial command echo status,serial command beep
output>
Default:
0 = Control
Options:
0 = Control
Beeper
Serial Cmd:
<K702,beeper
Default:
1 = Good Read
Options:
0 = Disabled
Quality Output
Separator (Quality Output)
Serial Cmd:
<K704,separator,decodes per trigger status>
Default:
, (comma)
Options:
Any 7-bit ASCII character
Decodes per Trigger Status (Quality Output)
Serial Cmd:
<K704,separator,decodes per trigger
Default:
0 = Disabled
Options:
0 = Disabled
QX Hawk Industrial Imager User Manual
status,serial command beep status,
1 = Enabled
status,serial command beep
1 = Enabled
1 = Hex
status>
1 = Good Read
status>
1 = Enabled
Appendices
status,
status,control/hex
2 = No Read
A-57
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the QX Hawk and is the answer not in the manual?
Questions and answers