Table of Contents
Advertisement
Firmware
Request Build Number by Serial Command
Note: X = base part number; R = revision number; B = build number
When
<#.>
(Display All Firmware Build Numbers) is sent, the imager returns:
<#a/35-XXXXXX-RR.BBB><#b/35-XXXXXX-RR.BBB><#d/35-XXXXXX-RR.BBB>
<#k/35-XXXXXX-RR.BBB><#p/35-XXXXXX-RR.BBB>.
When
<#a.>
(Display Application Firmware Build Number) is sent, the imager returns:
<#a/35-XXXXXX-RR.BBB>.
When
<#b.>
(Display Boot Firmware Build Number) is sent, the imager returns:
<#b/35-XXXXXX-RR.BBB>.
When
<#d.>
(Display DSP Firmware Build Number) is sent, the imager returns:
<#d/35-XXXXXX-RR.BBB>.
When
<#k.>
(Display Kernel Firmware Build Number) is sent, the imager returns:
<#k/35-XXXXXX-RR.BBB>.
When
<#p.>
(Display System Configuration File Build Number) is sent, the imager returns:
<#p/35-XXXXXX-RR.BBB>.
7-20
QX Hawk Industrial Imager User Manual
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the QX Hawk and is the answer not in the manual?
Questions and answers