Reset To Factory Default - Automation Direct C-more EA1-T4CL Hardware User Manual

Chapter 5: System Setup Screens
Setting – Clear User Memory
1 Brightness
2 Touch/Key Beep
3 Calibration
4 Clear User Memory
5 Reset to Factory Def
6 Hourglass
7 Rotation
5
Setting – Reset to Factory Default
1 Brightness
2 Touch/Key Beep
3 Calibration
4 Clear User Memory
5 Reset to Factory Def
6 Hourglass
7 Rotation
Factory default values can also be reset by pressing F2 and F4 while cycling power to the panel.
The Factory Default values are:
• Brightness value of 10
• The internal audible beeper enabled
• Forced touch panel calibration
• User program cleared from memory
• Hourglass icon delay of 350 ms.
• Horizontal orientation
NOTE: User memory is cleared when factory defaults are reset. Use the C-more Micro-Graphic
programming software to read the program from the panel iand save a backup copy.
5–10
BAK
SETTING
NXT
>
>
>
UP
>
DWN
>
ENT
ENT
BAK
SETTING
NXT
>
>
>
UP
>
DWN
>
ENT
ENT
® EA1-TCL-M Hardware User Manual, 2nd Ed., 10/10
With Clear User
Memory
highlighted, press
ENT [F5]. You will
be given the choice
to either proceed
with clearing the
user memory by
pressing [F5] for
YES or allowed to
cancel by pressing
[F1] for NO.
With Reset to
Factory Default
highlighted, press
ENT [F5]. Press [F5]
to restore all settings
to factory defaults
and clear user
memory. Press [F1] to
cancel.
NO
SETTING
1 Brightness >
Are you sure you
want to clear
memory?
No[F1] / Yes[F5]
ENT
YES
NO
SETTING
1 Brightness >
Are you sure you
want to clear
memory?
No[F1] / Yes[F5]
ENT
YES