Enclosure Clearances - Automation Direct C-more EA1-T4CL Hardware User Manual

Chapter 1: Getting Started

Enclosure Clearances

In all installations, a 1.2" [30mm] minimum clearance is required inside an enclosure for
1
proper ventilation of the C-more Micro-Graphic panel.
1.2
[30.0]
Rear View
NOTE: Additional clearance inside the enclosure is required when connecting to the 15-pin serial
NOTE: Cable connectors are typically longer than 1.2" (30mm). Therefore, in addition to ventilation
1–12
1.2
[30.0]
1.2
[30.0]
01
MOD L EA -T CL L
PU : 2 24V 5W C a s2
I T D
8 1
a e c de * *
M 7
M DE N CH NA ND CONT. Q.
15 9
A1 T CL + e i l n mber
1.2
[30.0]
Enclosure
units: inches [mm]
communications port (Port2) unless the 90 EA-ADPTR-4 is used.
* Additional clearance for cable bend radius typically 1/2" to 1"
Enclosure
2
*
[50.8]
1.2
[30.0]
Side View with
EA-2CBL
requirements, clearance must account for the connector and the cable bend radius.
®
EA1-TCL-M Hardware User Manual, 2nd Ed., 10/10
Enclosure Enclosure
1.2 1.2
[30.0] [30.0]
Side View with
Side view
EA-ADAPTR-4
Enclosure
1.5
*
[38.1]
1.2
[30.0]
Side View with
USB programming
cable
Enclosure
1.2
[30.0]
EA1-T6CL with
EA-MG6-BZ2(P)