Introduction; The Projectors - Christie Roadster S+12K Setup Manual

1.1

The Projectors

Main Features
Inputs
Roadster, Matrix WU, Mirage S+/HD/WU Setup Guide
020-100342-02 Rev. 1 (04-2011)
Every effort has been made to ensure the information in this document is accurate
and reliable; however, due to constant research the information in this document is
subject to change without notice.
This guide applies to the following projector models:
Roadster S+12K
Roadster S+16K
Roadster S+20K
Roadster HD12K
Roadster HD18K
General


DLP™ three-chip electronics with true 1400 x 1050 (SXGA+) or 1920 x
1200 (WUXGA) resolution, and 1920 x 1080 (HD) native resolution

Ten-bit digital video processing

Single-lens design with field-interchangeable, fast-change lens – no tools needed

Modular design for easy servicing

Intelligent Lens System (ILS

Built-in handles and multiple rigging points

lenses motorized
There are two different types of Input face plate configurations (model dependant).

Refer to Figure 1.1 & 1.2. These configurations may include the following inputs:

One analog RGBHV/YPbPr input with five BNCs

One DVI-I input for either digital RGB/YCrCb or analog RGB/YPbPr
signals

One analog composite-video input

One analog S-video input

Built-in multi-standard video decoder (NTSC, NTSC 4.43, PAL, PAL-M,
PAL-N, PAL-60 AND SECAM)

One Dual SD/HD-SDI module (standard on Roadster models only)

Compatible with all currently used HDTV formats

Introduction

Mirage S+12K
Mirage S+14K
Mirage S+16K
Mirage S+20K
Mirage HD12

) to save and restore lens settings
S e c t i o n 1
Mirage HD18
Mirage WU12
Mirage WU18
Matrix WU12
1-1