Operation; Overview; Projector Basics; Basic - Christie Roadster S+12K Setup Manual

3.1

Overview

3.2 Projector
Basics
Lens Release 
Handle 
Roadster, Matrix WU, Mirage S+/HD/WU Setup Guide
020-100342-02 Rev. 1 (04-2011)
This section explains how to use the projector once it has been installed. Please read
through these pages before using the projector for the first time. An understanding of
projector features and how to access them will help you to take full advantage of the
capabilities of the projector within minutes.
NOTE: Installation involves locating the projector and adjusting it for use at that
location. If you have not yet installed the projector, refer to Section 2, Installation
and Setup.
This section explains how to effectively operate the projector once it has been
installed. It is recommended that you read this section and familiarize yourself with
the components and the available menu options before you begin using your
projector for the first time.
Projector components and functions are illustrated below (Figure 3.1).
Figure 3.1. Basic Projector Components (* on Roadster series only)
Push lens release to enable the lens to be rotated for removal.
Handles are for brief hand transport only. Not used for hoisting, rigging, or as safety
points.
S e c t i o n 3

Operation

3-1