Menu Tree - Christie Roadster S+12K Setup Manual

STEP 6 
STEP 7 
STEP 8 
Step 9 
Roadster, Matrix WU, Mirage S+/HD/WU Setup Guide
020-100342-02 Rev. 1 (04-2011)
Select a Source
Using either keypad, press
the image for the source you connected in Step 3. The display will resize as needed
and produce largest possible image for the type of source present. NOTE: Refer to
Menu Tree, Appendix E, this allows you to quickly navigate to a specific menu, and
associated options/secondary menus.
Optimize the Display
Auto
Press on the built-in keypad (or
Setup
automated process in which the projector optimizes critical display parameters such as
size, position, pixel tracking, etc., for the current source. Auto Setup can save time in
perfecting a display and you can modify the adjustments later as desired. Refer to Section
3.
Lens Adjustments

: With the input image displayed:
ZOOM

If remote keypad: Press Zoom

If built-in keypad: Press Zoom
Hold the key down to see the effect – arrows in the display indicate
the direction of the zoom (Figure 2.2).

With the input image displayed:
FOCUS:

If remote keypad: Press Focus

If built-in keypad: Press Focus
Hold the key down to see the effect – arrows in the display indicate
the direction of the focus (Figure 2.3).

To move the image:
LENS OFFSET:

If remote keypad: Press either Lens H
(Figure 2.4).

If built-in keypad: Press
Image Adjustments
Press or (remote) to access display parameters described in Section 3.
Menu
, , ,
,
Input 1 Input 2 Input 3 Input 4 Input 5
on the remote keypad) to initiate an
.
or
.
or
or
or
and use the arrow keys.
Lens
Shift
Installation & Setup
, or
to select and display
Input 6
.
.
or Lens V
Figure 2.4
Figure
2.2
Figure
2.3
2-3