Christie Roadster S+12K Setup Manual page 15

Roadster, Matrix WU, Mirage S+/HD/WU Setup Guide
020-100342-02 Rev. 1 (04-2011)
RULES FOR ALL HOISTING:

Use at least four rigging points for hoisting
up to three projectors.

Connect safety cables, and rigging
equipment to the designated locations on
the projector.

Use hoisting and rigging equipment
suitable to your application such as clamps,
cables, eyebolts, or straps, and which
accommodate the load rating. All integral,
metric hardware on the projector accepts
an M12 thread only.

Never hoist a projector by its feet, handles,
or any other component (Figure 2.7).
Remove the lens before hoisting a projector.
Figure 2.7. NEVER Use Handles for Hoisting or as Safety Points
WARNING
Use metric hardware only.
Never force incompatible threads.
IMPORTANT
WARNING
Never hoist a projector by its feet,
handles, or any other component.
Installation & Setup
Figure 2.6. Bottom Rigging
Points
2-5