Christie Roadster S+12K Setup Manual page 34

Operation
Time-outs 
The Global Icon 
The PIP Icon 
Using Slidebars 
and Other Controls
3-14
Lamp
Lamp Hours
0
Lamp S/N ?
1. Lamp Message
2. Lamp Limit
1000
3. Lamp Mode Power
4. Power
500
5. Intensity 0
6. Optical Aperture 3
7. Lamp History
8. Change Lamp
Figure 3.6. Context-sensitive Help
From presentation level, press
Scroll as necessary within a topic. Press
Figure 3.7. Accessing General Help Topics
If a slidebar, menu, or message is displayed, you have limited time in which to make
a keypad entry before the projector returns to presentation level
disappears. These time-outs may vary depending on what is displayed.
Menu options that include this icon apply universally to any incoming signal.
Menu options that include this icon apply to PIP (secondary) images only.
Most of the function menus allow you to change settings by using slidebars,
checkboxes, and pull-down lists. To select a slidebar, toggle a checkbox status, or
view a pull-down list, do one of the following within the function menu:

Enter the menu option number corresponding to the setting you wish to change
(for example, press
the Size & Position menu).

Or move the highlight to the option desired and press

Or move the highlight to the option desired and press
immediately.

Or bypass the menus entirely and use a single key to immediately access an
adjustment during your presentation
NOTE: applies only to options having their own key, such as Contrast,
Brightness, Gamma, etc.

For "blind" access, hide the entire menu system (Refer to OSD key, above)
and/or direct slidebars activated by their own key (such as Contrast, Brightness,
etc.). Control by using the proper key press or numerical sequence of key presses.
Help
Enable a notice upon power-up
indicating the lamp has logged a given
number of hours as specified by
the lamp limit (default is lamp specific).
to access general Help Topics (Figure 3.7).
Help
or
Exit
Help
from the main menu to select Vertical Stretch in
1 3
Roadster, Matrix WU, Mirage S+/HD/WU Setup Guide
to return to your presentation.
and the graphic
Help
(Enter).
to adjust
020-100342-02 Rev. 1 (04-2011)