Christie Roadster S+12K Setup Manual page 40

Operation
Copying or 
Deleting Channels
3-20
Table 3.2. Abbreviations for Signal Type
Abbrev.
4WH
4WV
SG
5W
5WR
SVid
CVid
Dig
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —
highlight the desired channel in the Channel Setup menu and do one of two things:

Press if you want to copy the selected channel or delete this or other
Func
channels. See Copying or Deleting a Channel below.

Press if you want to edit channel setups (i.e., non-image related parameters)
Enter
for the selected channel. See Editing a Channel Setup, below.
, highlight the desired channel in the Channel Setup menu, and
TO COPY A CHANNEL
then press to go to the Channel Copy/Delete submenu. Select "Copy" and press
Func
—a new channel will be created. It is identical to original, which still remains,
Enter
but it is identified with the next available number from 01-50 (Figure 3.11). If you
change your mind and do not want to copy the current channel, press
and return to the previous menu. Copying channels is a quick method for creating
numerous channels, each of which can then be edited and adjusted for a variety of
presentations in the future.
, highlight the desired channel in the Channel Setup menu,
TO DELETE A CHANNEL
and then press to activate the Channel Copy/Delete submenu. Select "Delete"
Func
and press —a confirmation window will appear to confirm that you want to
Enter
delete this channel. See Figure 3.12.
Signal Type
Composite (4 wire) on HC input
Composite (4 wire) on V input
Sync-on-green
Separate H,V
Separate H,V swapped
S-Video
Composite Video
Digital
Figure 3.11. Copying a Channel
Roadster, Matrix WU, Mirage S+/HD/WU Setup Guide
To copy, delete or edit a channel,
to cancel
Exit
020-100342-02 Rev. 1 (04-2011)