Christie Roadster S+12K Setup Manual page 72

Optional Input Modules
RGB400BA Input Module
38-804610-xx
RGB400 Active Loop-Thru
Input Module 38-804607-xx
D-2
RGB500 Features

Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync), up to 500 MHz bandwidth

Accepts YPbPr, composite (on green) and Y/C (on red/blue)

BNC connectors for RGB signal inputs

Connect three-, four-, or five-wire RGB video signals of up to 400 MHz bandwidth—
these are signals typically produced by high-resolution computer or workstations. The
buffering capability of the module enables the incoming signal to be sent to a remote
destination. Inputs are 75
RGB400BA Features

Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)

Accepts YPbPr, composite (on green) and Y/C (on red/blue)

BNC connectors for RGB signal inputs

Buffered signals to a remote destination

The RGB400 ALT Input Module receives analog RGB input signals from computers
or other RGB source devices. Video inputs are 75
provide buffered loop-through to another display device.
RGB400 ALT Features

Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)

Accepts YPbPr, composite (on green) and Y/C (on red/blue)

BNC connectors for RGB signal inputs

Buffered loop-through video outputs
terminated.
S
Roadster, Matrix WU, Mirage S+/HD/WU Setup Guide
terminated. Video outputs
S
020-100342-02 Rev. 1 (04-2011)