Christie Roadster S+12K Setup Manual page 26

Operation
Wired Remote 
3-6
You can convert the IR remote into a wired remote keypad using the cable provided
with the projector. Connect one end into the remote and the other to the mini stereo
connector on the input panel labeled as
when:

The built-in keypad is inaccessible

The lighting conditions are unsuitable for proper IR transmission
NOTE: Leave the batteries in the wired remote for the laser key (
The "Brick" style rental staging – Standard IR remote, typically used with Roadster
models, is shown in Figure 3.4. It has no laser pointer, but includes three additional
keys: the Swap key for use with PIP functions, Backlight key for lighting keys, and
direct Input key used with the numbered keypad to switch from one input to another.
the shutter
Use to
Press OSD to turn Off
Figure 3.4. "Brick" Rental Staging – Standard IR Remote
. The wired remote is recommended
REMOTE
Roadster, Matrix WU, Mirage S+/HD/WU Setup Guide
) to work.
020-100342-02 Rev. 1 (04-2011)