Christie Roadster S+12K Setup Manual page 46

Maintenance
4.2 Replacing
Keypad
Batteries
4.3 Lamp and Filter
Replacement
4-4
The IR Remote Keypad uses two AA size, 1.5V batteries (preferably alkaline). To
install new batteries:
1) Open the battery
compartment at the
backside of the keypad by
placing your thumb in the
oval depression and sliding
the cover out about ½ inch.
See Figure 4.1. Remove
the old batteries and
properly discard. Wait a
minute or two.
2) Place the new batteries in the compartment, orienting the positive/negative of each
battery according to the labels in the compartment. When the batteries are in place,
replace the cover by placing the cover ½ inch from its closed position and slide it into
place. Do not force the cover.
NOTE: Always wait a minute or two when replacing batteries so that the internal
electronics discharge and can recognize the change.
For this procedure you will need the appropriate Roadster S+12K, Roadster HD12K/Matrix
WU12/Mirage WU12/Mirage HD12/Mirage S+12K, Roadster S+16K/Mirage S+14K/Mirage
S+16K or Roadster S+20K/HD18K/Mirage HD18/Mirage WU18/Mirage S+20K Lamp and
Filter Replacement Kit manufactured by Christie Digital Systems. See Table 4.2.
Table 4.2. Lamp and Filter Kits
Projector Model
Roadster S+12K (38-DSP210-xx)
Roadster HD12K (104-010101-xx)
Matrix WU12 (104-064101-xx)
Mirage HD12 (104-027101-xx)
Mirage S+12K (104-066103-xx)
Mirage WU12 (104-063100-xx)
Roadster S+16K (38-DSP214-xx)
Mirage S+16K (104-067104-xx)
Mirage S+14K (38-DSP214-xx)
Mirage HD18 (104-022101-xx)
Mirage HD18 (104-022138-xx)
Mirage HD18 (104-022127-xx)
Mirage HD18 (104-022116-xx)
Mirage WU18 (104-065102-xx)
Mirage WU18 (104-065135-xx)
Mirage WU18 (104-065124-xx)
Mirage WU18 (104-065113-xx)
Mirage S+20K (104-068105-xx)
Roadster HD18K (104-021101-xx)
Roadster HD18K (104-021137-xx)
Roadster HD18K (104-021126-xx)
Roadster HD18K (104-021115-xx)
Roadster S+20K (104-001101-xx)
Roadster S+20K (104-001135-xx)
Roadster S+20K (104-001124-xx)
Roadster S+20K (104-001113-xx)
Figure 4.1. Replacing Batteries
Lamp Type
(Watts)
2.0 kW
2.4 kW
3.0 kW
Roadster, Matrix WU, Mirage S+/HD/WU Setup Guide
Lamp/Filter Kit Required
03-900519-51P
003-120135-xx
003-120135-xx
003-120135-xx
003-120135-xx
003-120135-xx
03-900518-51P
03-900518-51P
03-900518-51P
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
003-000306-xx
020-100342-02 Rev. 1 (04-2011)