Factory Default - Planet ICA-H652 User Manual

4.3.15 Factory Default

The factory default setting page is shown below. Follow the instructions to reset the IP Camera to
factory default setting if needed.
Full Restore
Click on the "Full Restore" button to recall the factory default settings. Then the system will restart in 30
seconds.
The IP address will be restored to default.
Partial Restore
Click on the "Partial Restore" button to recall the factory default settings except the network setting.
Then the system will restart in 30 seconds.
Reboot
Click on the "Reboot" button, and the system will restart without changing current settings.
H.264 36x Outdoor Speed Dome Internet Camera
- 79 -
ICA-H652