System Update; Reboot System; Factory Default - Planet ICA-4250 User Manual

3.8.1 System Update

To update the firmware online, click "Select file" to select the firmware. Then click "Remote
Upgrade" to proceed.
1. Make sure that the firmware only applies to this device; once updated, it will be
burned into FLASH ROM of system.
2. The firmware upgrade procedure cannot be interrupted. If the power and/or
network connection are/is broken during the download procedure, it might
possibly cause serious damage to the device.
Please be aware that you should not turn off the power during updating the
firmware and waiting for the "finish" message. Furthermore, do not try to
upgrade new firmware if necessary.

3.8.2 Reboot System

The device is restarted without changing any of the settings.

3.8.3 Factory Default

Clicking the Restore button will reset all devices' parameters to the factory settings (including
the IP address).
1080p IR Dome PoE IP Camera
- 50 -
ICA-4250